Classification of Hydraulic Excavator Bucket

Classification of Hydraulic Excavator Bucket
June 11, 2019 No Comments News & Tips aidomachinery

The bucket of hydraulic excavator can be divided into the front end bucket and a back end bucket. The front end bucket mainly used for large excavators while back end bucket mainly used for smaller and medium size excavators. With different usage, there are many different types of bucket that can be replaced according to your requirement.

Hydraulic Excavator Bucket
Hydraulic Excavator Bucket
Back End Bucket Excavator
Earthwork Bucket

 

Earthwork buckets are the most common bucket that used for the excavators. The general backhoe excavators are equipped with earth buckets. It is suitable for excavation of general clay and light work applications such as loading of sand, earth and gravel. The enhanced earth bucket can excavate hard soil, mixed soft soil, soft stone, gravel, gravel loading and other heavy-duty operations.
Rock Bucket

 

The high-stress part is particularly reinforced, and the wear-resistant part is thicker and has a reinforcing rib at the bottom. There are reinforcements on the sides of the bucket teeth, the bucket wings, the bucket teeth, and the bottom of the bucket. In addition, the rock bucket adds side guards and the guard plates are installed. It is suitable for excavation of hard rock, secondary stone and weathered stone in soil; heavy load operation such as loading of rock and post-blasting ore.
Loose Soil Bucket

 

It is mainly used for crushing, excavation and loading of hard soil, secondary stone and weathered stone, or construction work of frozen soil. Generally, it has single or multi-toothed teeth, sharp teeth and easy to break ground. High-strength loose soil teeth are installed on the bucket, which has a large excavation strength; the excavation of the loose soil is completed once, and the work efficiency is high.
Ditch Bucket

 

The excavator gutter bucket is suitable for excavation of various shapes of trenches. In order to meet different operational requirements, the bucket bucket bucket has various widths and shapes, such as rectangular, trapezoidal, and triangular. The trench is excavated once, and generally does not need to be trimmed, and the work efficiency is high.
Mud Bucket The mud bucket has become a dredging bucket, with no teeth and a large width. The mud bucket is very suitable for the plane finishing of slopes requiring large capacity, dredging work of rivers and ditches, etc.
Tilt Bucket Under all the characteristics of the mud bucket, the tilt bucket can also control the rotary bucket through the action of the cylinder. The maximum tilt angle is 45 degrees, and the work can be performed without changing the position of the excavator, and the precise operation that the ordinary bucket can not complete can be easily completed. It is suitable for dredging work such as brushing slope, uniform plane retreat and river channel and ditch.
Trapezoidal Bucket

 

Excavator trapezoidal buckets are available in a variety of sizes and shapes, such as triangles or trapezoids. Suitable for operations such as water conservancy, highways, agriculture and pipeline trenching. It is characterized by its ability to be formed at one time and with high work efficiency.

Get more information from AIDO Group Now!

Please feel free to give your inquiry in the form below. We will reply in 24 hours.
Product Model:

Your Name(required):

Your Email(required):

Your Tel:

Your country:

Your Company:

Your Message(required):

About The Author