Leading Manufacturer With Types of New Construction Machinery for Sale – AIDO Machinery
How to maintain the reducer for road roller?
Reducer is an important part for the road roller. So it is very important to maintain the reducer for these road roller machinery. Here AIDO will show you some tips on the reducer maintaining. How to maintain the reducer for road roller equipment, first of all, the replacement of the new spare parts for the road roller reducer must be officially used after running and load test.
Second, the reducer of road roller should be checked regularly to see whether the installed basic components, seals, drive shafts and other components are normal. Road roller manufacturer-AIDO suggests that if you want to keep the gearbox working properly, the temperature of the lubricant should not higher than 85℃.
Third, if the temperature of the oil changes abnormally and there generated some abnormal noise, you should shut off the road roller and inspect immediately. When you remove the malfunction, you can restart to use the road roller.
Fourth, the gearbox shell can’t be bitten by the gravity hammer. If the shell is broken, you can consult the professional road roller manufacturer.
Last but not least, the lubricating oil of the special reducer for the road roller needs to be replaced in time. Working temperature of the reducer is The lubricating oil of the special reducer for road roller needs to be replaced in time. The operating environment temperature of the reducer is -40℃ to +40 ℃. When the ambient temperature is below 0℃, the lubricating oil must be heated above 0℃ or a low freezing point lubricant before starting.
For other detailed tips for the road roller reducer maintaining tips, you can ask user manual from AIDO construction machinery when you decide to buy a new road roller or just replace the reducer.